AFFRI Hardness Tester 206EX

AFFRI Hardness Tester 206EX

฿0.00

206 EX is a fast and really easy bench hardness testers with high accuracy standards. To perform the test just act on the elevating screw and bring the sample to make contact with the indenter, then pull the lever activating preloading and loading in automatic succession; within seconds results appear. Load forces are applied through two dynamometric load cells which eliminates problems associated with dead weight systems on traditional testers. It is not affected by vibration and it doesn’t need to be leveled.

Brand AFFRI
OR
Description

Details

 

FAST & EASY

To perform the test just act on the elevating screw and bring the sample to make contact with the indenter, then pull the START lever and apply the load; within seconds results appear. Load forces are applied through two dynamometric load cells which eliminates problems associated with dead weight systems on traditional testers. It is not affected by vibration and it doesn’t need to be leveled.

 

SOFTWARE

The pre-installed software controls the whole instrument during the entire cycle avoiding operator errors. Powerful analysis system with easy and fast test settings, live statistics and graph. Data and test sessions storage

 

 

L.I.S.A.
Laser pointing system (Pat. AFFRI).

Allows for a precise test positionpointing before the contact betweenthe indenter and the sample.Excellent solution for gear teeth andblade and cutting tools edges.

 

OPTICAL SYSTEM (OPTIONAL)
Brinell and Vickers MEASUREMENTS (ISO 6506 - 6507 / ASTM E10 - E384)

Rotating arm with self-alignment of the optical with the indentation axis. Automatic centering with no need to move the specimen. Interchangeable objectives: 1x 2x 3x 4x for 5x 10x 15x 20x and 15x eyepiece for manual measure, (total magnification: 75x 150x 225x 300x) and also camera available for auto measure.

 

ACCESORIES (OPTIONAL)

The visible indenter allows to reach extreme points and small details. Different anvils are
provided to accommodate any type of sample. It is possible to apply a C shape indenter (art. 604) to reach difficult points as inside of tubes and near to hollows.

 

CLAMPING HOOD (OPTIONAL)

It assures a perfect locking of the specimen through the whole test cycle. No need of additional supports when testing long samples.


TECHNICAL FEATURE


MODEL

206 EX 206 EXS 206 EX2
Fields of use
Hardness tests on all metals: iron, steel, tempered steel, cast iron, brass, aluminium, copper and metal alloys. Heat treatment, hardening, nitriding, cementation and hardfacing. Hard and soft plastics.

Standards
EN-ISO 6506-2 / EN-ISO 6507-2 / EN-ISO 6508-2 / ASTM E-18 / ASTM E-10


Elevating screw stroke

0/215 mm

Depth capacity

190 mm

Preload

98.1 N (10 kgf)
29.4 N (3 kgf) 29.5, 98.1 N (3, 10 kgf)
Test Load
Rockwell:
588.4 - 980.7 - 1471 N (60 - 100 - 150 kgf)

Vickers (Only indentation):
98.07 - 980.7 N (10 - 100 kgf)

Brinell HBWT (Optional):
98.07 - 612.9 - 1226 - 1839 N
(10 - 62.5 - 125 - 187.5 kgf)
Superficial Rockwell:
147.1 - 294.2 - 441.3 N (15 - 30 - 45 kgf)

Vickers (Only indentation):
29.42 - 294.2 N (3 - 30 kgf)

Brinell HBWT (Optional):
153.2 - 294.2 - 306.5 N (15.625 - 30 - 31.2 kgf)


Rockwell:
588.4 - 980.7 - 1471 N (60 - 100 - 150 kgf)

Superficial Rockwell:
147.1 - 294.2 - 441.3 N (15 - 30 - 45 kgf)

Vickers (Only indentation):
98.07 - 29.42 - 294.2 - 980.7 N (3 - 10 - 30 - 100 kgf)

Brinell HBWT (Optional):
98.07 - 153.2 - 294.2 - 306.5 - 612.9 - 1226 - 1839 N

(10 - 15.625 - 30 - 31.2 - 62.5 - 125 - 187.5 kgf)

 Feasible tests
Rockwell:
HRA - HRB - HRC - HRD - HRE - HRF - HRG - HRH - HRK

Vickers (Only indentation):
HV10 - HV60 - HV100

Brinell HBWT (Optional):
5/125(3) (Aluminum and its alloys) - 2.5/62.5(2) (Aluminum and its alloys) - 2.5/187.5(6) (Aluminum and its alloys) - 2.5/187.5(5) (Carbon steel) - 2.5/187.5(1) (Cast iron)
Superficial Rockwell:
HRN + HRT

Vickers (Only indentation):
HV3 - HV15 - HV30

Brinell HBWT (Optional):
1/30 - 2.5/15.6 - 2.5/31.5

Rockwell:
HRC - HRA - HRD - HRB - HRF - HRG - HRL - HRM - HRR


 Superficial Rockwell:
HRN + HRT

Vickers (Only indentation):
HV3 - HV10 - HV15 - HV30 - HV60 - HV100

Brinell HBWT (Optional):
1/30 - 2.5/15.6 - 2.5/31.5 - 5/125(3) (Aluminum and its alloys) - 2.5/62.5(2) (Aluminum and its alloys) - 2.5/187.5(6) (Aluminum and its alloys) - 2.5/187.5(5) (Carbon steel) - 2.5/187.5(1) (Cast iron)


Load accuracy

Better than 0.5 %  
Reviews
5 star
0
4 star
0
3 star
0
2 star
0
1 star
0

Image

Feature

Upsell products