AFFRI Portable Hardness Tester Tester ELECTRONIC SHORE

AFFRI Portable Hardness Tester Tester ELECTRONIC SHORE

฿0.00

ELECTRONIC SHORE - PORTABLE HARDNESS TESTER FOR RUBBER, PLASTIC, MEDICAL COMPONENTS, PAPER AND SPONGE.

Shore A - B - C - D - D0 - 0 - 00 - E - M - 000 - 000S

Digital portable hardness tester in compliance with ASTM 2240, ISO R.868, DIN 53505, JIS K7215 standards. Slim measuring nose to ensure exact measurement also on small components. Suitable for tires, O-rings, roll, for soft flexible rubber, plastic, PVC, polyester, neoprene, leather, thiokol, nitril rubbers, etc. Operating console with LCD screen. Measure at peak / at time / Continuous, store and number of tests, automatic average, list of stored result, statistic, standard deviation, histogram. Data output for computer or printer connection RS 232 C or USB. The probe can be installed on the bench support, manual or motorized, for laboratory purpose.

Brand AFFRI
OR
Description

Details

ELECTRONIC SHORE

PORTABLE DIGITAL HARDNESS TESTER WITH HIGHST ACCURACY STANDARDS

The AFFRI Electronic Shore tester is a compact device suitable for measuring the hardness of plastic, rubber, polymers, elastomers and synthetic materials. The Electronic Shore hardness tester is in compliance with ASTM D2240, ISO 7619 and ISO 868 standards. It is extremely easy to use: just push the probe on the surface of the sample and wait for the dwell time till the result appears on the display!

MAIN FEATURES:

• 100% made in Italy
• Interchangeable probes with easy plug/unplug
• Suitable for performing accurate and fast test on small and large samples
• The ergonomic probe can be used in any direction, even upside down
• R&R high performance
• Robust and resistant in every test condition
• Tungsten carbide indenter to guarantee maximum efficiency over the time
• The tester can be installed on the manual or motorized bench support for laboratory purpose

 

ERGONOMIC PROBE

Slim measuring nose to ensure exact positioning also on small components. Able to use in any direction even upside down. Micro probe Shore A for easy inside tests Min Ø45 mm. Come along with the suitcase in hard-plastic with internal foam structure to acommodate the hardness tester

 

BENCH-TOP STAND SUPPORT

Bench stand support for extremely precise hardness testing. The force is applied perpendicularly to the sample surface with high stability whitin any dwell time. The constant pressure from the top assures a very accurate measurement. Very easy mounting of the probe on the stand support, just screw-unscrew. Supplementary weight for Shore C-D-DO are available.

 

HANDCLAMP SUPPORT

Clamping system to lock the sample during the test for perfect stability. The handclamp is equipped with dual linear bearing guides with a coaxial error of only 2 microns. However, due to the particular shape of some samples, we recommend the use of specific optional supports which can be developed according to customer requirement.

 

O-RING TEST - ASTM 1414

Set of clamping holders to be connected to the bench support for very precise hardness testing on O-Rings in compliance with ASTM 1414. Sections Ø 1 - 1.79 - 2.62 - 3.53 - 5.33 - 6.99 mm, other on request. All AFFRI’s accessories are customizable according to customers specifications, depending on dimensions and geometry of the samples.

THE SOFTWARE

Display and intuitive keyboard with IP 64 protection. Set of the hardness test method. Measurement settings. Storable and printable statistics. Results, averages and conversions

• Measure at peak / at time / continuou. Measure of temperature
• Store the number of tests with automatic average, list of stored result, statistics, standard deviation, histogram
• RS 232 C data out-put or USB (optional) for connection to PC and printer
• Battery charge indicator and Bat. shut off after 2 minute not use

 

TECHNICAL FEATURE


MODEL

ELECTRONIC SHORE
Available probes:
Shore A - D - B - C - D0 - O - OO - E - M - OOO - OOOS Micro

Conformity Standards:
DIN EN ISO 868 / 7619 - ASTM D2240


Accuracy:

Better than 1 %

Readout division:

0.1 Shore

Measures:

at time, Peack, braking point

Handclamping:

Height capacity 0-35 depth 30mm
Dimensions:
Electronic console: 112 x 180 x 70 mm - Probe diameter 40 , foot diameter 16mm, height 108 mm + Cable


Weight:

1,4 kg (probe 0.5 kg)

Temperature Range:

From 10 °C to 35 °C

Data Output:

RS232 C Standard / USB Optional

Power Supply:

Rechargeable battery 6V - Charger 110 or 220 V

Software:

Affri - OMAG
Fields Of Use:
Rubber, plastic, medical items, papers, sponges, synthetic fibers


Net Weight:

4 kg

Net Measures:

470 x 400 x 150 mm in a portable suit case

 


SCALE

STANDARD TIP APPLICATION
Shore A  ASTM E2240 / ISO 7619 Frustum 35° 
Soft surfaces, flexible rubber, natural rubber, plastic, PVC, polyester, neoprene, leather, nitrile rubbers, tires, etc

Shore D ASTM E2240 / ISO 7619 Cone 30°
Hard and rigid surfaces, ceramic and composites, acrylics, plexiglass, print rolls, cellulose, acetates, nylon, etc

Shore B ASTM E2240  Cone 30°
Medium values. As A scale for higher values.

Shore C ASTM E2240 Frustum 35°
Medium-hard values. As D scale for lower values.

Shore DO ASTM E2240 Ball 1.2 mm
From medium-hard to hard values. As B and C.

Shore O ASTM E2240 Ball 1.2 mm
Low values and very flexible materials. As A scale for low values.

Shore OO ASTM E2240 Ball 1.2 mm
Very soft rubbers, sponges, expanded rubber, foam rubber, natural rubber and silicon

Shore E ASTM E2240 Ball 2.5 mm
Very soft rubbers, natural rubber, elastomers, casting resin, soft PVC, leather, etc.

Shore M ASTM E2240 Cone 30°
As A scale, for thin specimens and elastomer materials.

Shore 000 ASTM E2240 Ball 6.35 mm
Ultra-soft rubbers, sponges, expanded rubber, foam rubber, natural rubber and silicon.

Shore 000-S ASTM E2240 Ball 10.7 mm
Ultra-soft rubbers, viscoelastic polymers.

 

 

Reviews
5 star
0
4 star
0
3 star
0
2 star
0
1 star
0

Image

Feature

Upsell products