MOTORIZED MEASURING HEAD
Just press one button and the head moves down, applies the force, makes the indentation, reads the indent and moves back upward. Fully motorized with 90 mm of vertical stroke.
CLOSED LOOP TECHNOLOGY (PAT. AFFRI)
Closed loop load cells control load forces with a frequency of 1 khz, assuring perfect linearity in every range. Results are not affected by any structural deflection, misalignment or vibration.
One slot for an indenter and one slot for an objective. Auto-rotating and auto-tool-switching for a complete automatic measurement cycle.
It is completely uninfluenced by direction so that it can operate up to 360° degrees of positioning, even upside down. Safe clamping on any surface, from round to flat, with self-allignment of the indenter with the measurement axis.
TOUCH SCREEN WITH SOFTWARE
Powerful software for test cycle management and automatic indent reading. Wide settings parameters for measurement setup, image adjustments, statistics and data storage.
AUTOFOCUS AND IMAGE CLEANING
With software controlled focus, image cleaning, shading correction and DC regulated light source, reproducible results are obtained regardless of the number of indents measured. From perfectly polished to rough and etched samples, the auto-detection capabilities of WIKI JS allow measurements on a variety of sample surfaces.
The indenter/objective turret slides horizontally for ca 5 mm. The system provides the ability to perform multiple inentations on one axis, with high positioning accuracy, without moving the tester.
BENCH TOP USE
The portable tester WIKI 30 can be used as a conventional bench-top hardness tester for very high accuracy tests on small pieces.
DIN-EN-ISO 6506 / DIN-EN-ISO 6507 / DIN-EN-ISO 4545 / ASTM-E92 / ASTM 384 / JIS Z231
± 5 mm (Automatic or manual)
Vertical head stroke
0/90 mm motorized
100X, 200X, 400X
Vickers (Knoop and Brinell on request)
Focus & Reading
Manual forcus with auto reading Test loads
Vickers (Knoop on request): 0.9807 - 1.961 - 2.942 - 4.903 - 9.807 - 19.61 - 29.42 - 49.03 - 61,29 - 98.07 - 147.1 - 152.98 - 196.14 - 245.17 - 294.21 N(0.1 - 0.2 - 0.3 - 0.5 - 1 - 2 - 3 - 5 - 6.25 - 10 - 15 - 15.6 - 20 - 25 - 30 kgf)
Vickers: HV0.1 - HV0.2 - HV0.3 - HV0.5 - HV1 - HV2 - HV3 - HV5 - HV10 - HV20 - HV30
Knoop (On request): HK0.1 - HK0.2 - HK0.3 - HK0.5 - HK1
Brinell (On request)
Better than 0.1 %