AFFRI WIKI 30

AFFRI WIKI 30

฿0.00

Portable hardness tester for micro/macro Vickers and Knoop methods with indentation autoreading. Hardness testing on bulky tubes or valves in compliance with ASTM E384, ISO 6507 and ISO 4545 hardness standards. WIKI 30 is a motorized portable hardness tester targeted for use by the Oil & Gas market sector in order to control placed plants in local

Brand AFFRI
OR
Description

Details

MOTORIZED MEASURING HEAD

     

CLOSED LOOP TECHNOLOGY (PAT. AFFRI)

Just press one button and the head moves down, applies the force, makes the indentation, reads the indent and moves back upward. Fully motorized with 90 mm of vertical stroke.

     

Closed loop load cells control load forces with a frequency of 1 khz, assuring perfect linearity in every range. Results are not affected by any structural deflection, misalignment or vibration.

         
 MOTORIZED TURRET      

360° POSITIONING

One slot for an indenter and one slot for an objective. Auto-rotating and auto-tool-switching for a complete automatic measurement cycle.

     

It is completely uninfluenced by direction so that it can operate up to 360° degrees of positioning, even upside down. Safe clamping on any surface, from round to flat, with self-allignment of the indenter with the measurement axis.

         

ITOUCH SCREEN WITH SOFTWARE

     

AUTOFOCUS AND IMAGE CLEANING

Powerful software for test cycle management and automatic indent reading. Wide settings parameters for measurement setup, image adjustments, statistics and data storage.        With software controlled focus, image cleaning, shading correction and DC regulated light source, reproducible results are obtained regardless of the number of indents measured. From perfectly polished to rough and etched samples, the auto-detection capabilities of WIKI JS allow measurements on a variety of sample surfaces.
         

MULTI INDENTATION

     

BENCH TOP USE

         
The indenter/objective turret slides horizontally for ca 5 mm. The system provides the ability to perform multiple inentations on one axis, with high positioning accuracy, without moving the tester.       The portable tester WIKI 30 can be used as a conventional bench-top hardness tester for very high accuracy tests on small pieces.
         

 

TECHNICAL FEATURE

MODEL

WIKI 30

Standards

DIN-EN-ISO 6506 / DIN-EN-ISO 6507 / DIN-EN-ISO 4545 / ASTM-E92 / ASTM 384 / JIS Z231

Horizontal head stroke

ca 5 mm

Vertical head stroke

0/90 mm motorized

Objectives

100X, 200X, 400X

Indenters

Vickers (Knoop and Brinell on request)

Test loads

Vickers (Knoop on request): 0.9807 - 1.961 - 2.942 - 4.903 - 9.807 - 19.61 - 29.42 - 49.03 - 61,29 - 98.07 - 147.1 - 152.98 - 196.14 - 245.17 - 294.21 N

(0.1 - 0.2 - 0.3 - 0.5 - 1 - 2 - 3 - 5 - 6.25 - 10 - 15 - 15.6 - 20 - 25 - 30 kgf)

Feasible tests

Vickers: HV0.1 - HV0.2 - HV0.3 - HV0.5 - HV1 - HV2 - HV3 - HV5 - HV10 - HV20 - HV30

Knoop (On request): HK0.1 - HK0.2 - HK0.3 - HK0.5 - HK1

Brinell (On request)

Accuracy

Better than 0.1 %

Reviews
5 star
0
4 star
0
3 star
0
2 star
0
1 star
0

Image

Feature

Upsell products