USER FRIENDLY, HANDY AND ACCURATE. HARDNESS TESTS DIRECTLY IN PRODUCTION DEPARTMENT WITHOUT THE NEED OF TESTS IN LABORATORY.
With the MKII portable durometer it is possible to perform quick and precise Rockwell, Brinell and Vickers hardness measurements as well as determine ultimate strength anywhere, inside or outside your production department. A diamond indenter ensures precise hardness readings on all surfaces. A variety of accessories to facilitate testing on small or oddly shaped items, on differently shaped samples or on finished items. Tester’s limited weight and the compact size make it an extremely efficient durometer to test any surface, any large or unwieldy item or any already assembled product. The narrow and elongated head is ideal to reach surfaces such as the inner parts of castings or of finished housings. It is extremely easy to use: simply choose the desired hardness scale, put the test probe on the surface and apply a light pressure to start the entire test cycle. At the end of the test, the instrument lets out a sound signal and the result immediately appears on the wide graphic display. At this point the hardness tester is once again ready for a new measurement.
HARDTEST - HAND CLAMP SUPPORT
Smart digital console with LCD screen, large hard disk for data and statistics storage and data outputs that connect to a printer or computer, with an RS232C connection or USB connection upon request. Hardness testing data are simultaneously shown on the LCD graphic display: detected values in various simultaneous scales, average of the values with automatic updating, battery level, findings according to the tolerance limits expressed both numerically and graphically, programmable test preload and load timer, statistics and Gauss diagram, sound signal to indicate the end of the cycle. It is also possible to display the temperature and the date.
Very useful instrument especially for hard-to-test items or for items with odd shapes (i.e. tests on spring wires). HARDTEST is a hand clamp system that accomodates your MKII or METALTEST, which blocks the testing piece and allows steady measurements avoiding sample movements. Easy and safe with a testing capacity of 30 x 30 mm. It comes with an anvil and various accessories.
Very useful motorized stand support for the laboratory, where it is necessary to test small sized items. Height capacity: 110 mm - Depth capacity: 60 mm Very useful stand supprot for the laboratory, where it is necessary to test small sized items. Height capacity: 170 mm - Depth capacity: 75 mm
ASTM E110 / DIN 50157
RS 232 C (USB on request)
1 kgf (9.807 N)
2 or 5.6 kgf (19.614 or 54.92 N)
Rockwell HRA (20...92); HRB (26...100); HRC (0...80); HR15N (69...93); HR30T (16...83)
Brinell HB5 (5...205); HB30 (66...884)
Tensile Module R (226.. .2898); HZA (0...250)
Webster B 0 / 20 (On request)
Barcol 0 / 100 (On request)
Leeb unit (On request)
Better than 1 %