AFFRI METALTEST

AFFRI METALTEST

฿0.00

Compact and pocket hardness tester version. METALTEST is a wireless hardness tester with comands and LCD incorporated on the top. It is very handy and easy to use: just place the hardness tester on the surface to be examined and press the handgrip right down; release the pressure and the piece hardness immediately appears on the display.

Brand AFFRI
OR
Description

Details

     

 

USER FRIENDLY, HANDY AND ACCURATE. HARDNESS TESTS DIRECTLY
IN PRODUCTION DEPARTMENT WITHOUT THE NEED OF TESTS IN LABORATORY.

 

With the METALTEST portable durometer it is possible to perform quick and precise Rockwell, Brinell and Vickers hardness measurements as well as determine ultimate strength anywhere, inside or outside your production department. A diamond indenter ensures precise hardness readings on all surfaces. A variety of accessories to facilitate testing on small or oddly shaped items, on differently shaped samples or on finished items. Tester’s limited weight and the compact size make it an extremely efficient durometer to test any surface, any large or unwieldy item or any already assembled product. The narrow and elongated head is ideal to reach surfaces such as the inner parts of castings or of finished housings. It is extremely easy to use: simply choose the desired hardness scale, put the test probe on the surface and apply a light pressure to start the entire test cycle. At the end of the test, the instrument lets out a sound signal and the result immediately appears on the wide graphic display. At this point the hardness tester is once again ready for a new measurement.

 

         

 

     

HARDTEST - HAND CLAMP SUPPORT

Very useful instrument especially for hard-to-test items or for items with odd shapes (i.e. tests on spring wires). HARDTEST is a hand clamp system that accomodates your MKII or METALTEST, which blocks the testing piece and allows steady measurements avoiding sample movements. Easy and safe with a testing capacity of 30 x 30 mm. It comes with an anvil and various accessories.



TECHNICAL FEATURE

MODEL

METALTEST

Standards

ASTM E110 / DIN 50157

Data output

RS 232 C (USB on request)

Preload

1 kgf (9.807 N)

Test loads

5.6 kgf (54.92 N)

Feasible tests

Rockwell HRA (20...92); HRB (26...100); HRC (0...80); HR15N (69...93); HR30T (16...83)

Brinell HB5 (5...205); HB30 (66...884)

Knoop (25...97)

Vickers (13...1865)

Tensile Module R (226.. .2898); HZA (0...250)

Webster B 0 / 20 (On request)

Barcol 0 / 100 (On request)

Leeb unit (On request)

Accuracy

Better than 1 %

 

Reviews
5 star
0
4 star
0
3 star
0
2 star
0
1 star
0

Image

Feature

Upsell products