| Model |
PMCD-18W-200-CP-SD |
| Exterior dimension |
480 * 600 * 600 mm (W*H*D)(including projected parts) |
| Standard Channel |
A/B Port each 10 channel/module/360w (max 200 channel/set) |
| Maximum control Module |
10 module/3.6 KW |
| Method of Test setting |
Set module (start/stop) ; each module A/B single control ,can set different current & data |
| Output voltage/current range |
0~12V/ 0~1500mA(1mA/Step)/channel |
| Operation mode |
CC |
| sample rate & com interface |
1Sec~59:59mm:ss (Sample to Controller) , 5 sec (Sample to PC) & RS485 or RS232 |
Continuous Mode
ON-OFF Mode
PULSE Mode
|
Select Continuous Mode
Allow Switch ON-OFF Pulse Set(0~59,59mm:ss), cycle set function
(decimal)
Allow Switch pulse model;peak pulse current ;1/10 duty pulse width (1mS) |
| Current Set/Max test time |
Bias & Test current –10CH(setting of bias positive current /test positive current setting) / 9999.9Hr |
| Data reading & link number of machines |
read /record value of the voltage & current & temp. of channel and T/H values of each Chamber /max 32 Set |
| Output & indicator |
1%±2mA & 0.1V/1mA |
| Voltage / Current values Conversion curve |
record the voltage and current values of each Channel can convert the Curve |
| Voltage /Current/Temp. Analysis |
Recording of the start /sample/ end time of voltage/ current/ temp. |
| Excel report conversion |
Set condition data, measurement data and voltage shortage data converted as Excel file |
| Power Source |
AC 220V/25A , 50/60Hz |
| Model |
PMCD-18W-40-CP-SD |
| Exterior dimension |
480 * 400 * 510 mm (W*H*D)(including projected parts) |
| Standard Channel |
5 channel/module/87.5w (max 40channel/set) |
| Maximum control Module |
8 module/700W |
| Method of Test setting |
Set module (start/stop) ; each module single control ,can set different current &data |
| Output voltage/current range |
0~35V/ 0~500mA(0.1V/1mA/Step)/channel |
| Operation mode |
CC/CV Switch |
| sample rate & com interface |
1Sec~59:59mm:ss (Sample to Controller) , 5 sec (Sample to PC) & RS485 or RS232 |
Continuous Mode
ON-OFF Mode
PULSE Mode
|
Select Continuous Mode
Allow Switch ON-OFF Pulse Set(0~59,59mm:ss), cycle set function
(decimal)
Allow Switch pulse model;peak pulse current ;1/10 duty pulse width (1mS) |
| Current Set/Max test time |
Test current & volt –10CH(setting of bias positive current & volt --test positive current & volt setting) / 9999.9Hr |
| Data reading & link number of machines |
read /record value of the voltage & current & temp. of channel and T/H values of each Chamber /max 32 Set |
| Output & indicator |
1%±2mA & 0.1V/1mA |
| Voltage / Current values Conversion curve |
record the voltage and current values of each Channel can convert the Curve |
| Voltage /Current/Temp. Analysis |
Recording of the start /sample/ end time of voltage/ current/ temp. |
| Excel report conversion |
Set condition data, measurement data and voltage shortage data converted as Excel file |
| Power Source |
AC 220V / 7A , 50/60Hz |
| Model |
PMCD-1W-400-CP-SD |
| Exterior dimension |
480 * 400 * 510 mm (W*H*D)(including projected parts) |
| Standard Channel |
A/B Port each 10 channel/module/40w (max 400channel/set) |
| Maximum control Module |
10 module/400W |
| Method of Test setting |
Set module (start/stop) ; each module A/B single control ,can set different current & data |
| Output voltage/current range |
0~5V/ 0~200mA(1mA/Step)/channel |
| Operation mode |
CC |
| sample rate & com interface |
1Sec~59:59mm:ss (Sample to Controller) , 5sec (Sample to PC) & RS485 or RS232 |
Continuous Mode
ON-OFF Mode
PULSE Mode
|
Select Continuous Mode
Allow Switch ON-OFF Pulse Set(0~59,59mm:ss), cycle set function
(decimal)
Allow Switch pulse model;peak pulse current ;1/10 duty pulse width (1mS) |
| Current Set/Max test time |
Bias & Test current –10CH(setting of bias positive current /test positive current setting) / 9999.9Hr |
| Data reading & link number of machines |
read /record value of the voltage & current & temp. of channel and T/H values of each Chamber /max 32 Set |
| Output & indicator |
1%±2mA & 0.1V/1mA |
| Voltage / Current values Conversion curve |
record the voltage and current values of each Channel can convert the Curve |
| Voltage /Current/Temp. Analysis |
Recording of the start /sample/ end time of voltage/ current/ temp. |
| Excel report conversion |
Set condition data, measurement data and voltage shortage data converted as Excel file |
| Power Source |
AC 220V/ 4A , 50/60Hz |
