MODEL 206RT SERIES

ELECTRONIC MANAGEMENT OF THE MEASUREMENT CYCLE
- Each test phase is followed on the liquid crystal display in digital progression.
- Keyboard setting of the measurement data: choice of Rockwell or Brinell hardness scales.
- Sets out the minimum and maximum tolerance limits.
- Test time that can be -set-out from 1 to 99 seconds.
- Data output via RS 232 C for connection to printer and computer for diagram plotting and statistics.
- Digital reading on all Rockwell and Brinell scales and tensile module conversion.
• Twin Rockwell - Brinell
• Digital Read Out
• Data print out


The loads can be selected by a rotary knob and scale on the indenter axis.
- Permits Rockwell and Brinell tests and Vickers impressions.
- The operating principle is the classic Rockwell principle with direct Rockwell hardness on a large dial.
- Brinell hardness is also obtained directly with application of a graduated dial, or use of conversion tables.
- By the use of Rockwell scales the pointer dial shows the accurate Rockwell result directly. Brinell scales can easily be put over the dial.
- Preloading takes place by the contact of the piece with the indenter.
- The scales zero setting is obtained by rotating the dial.
- The proof load is applied to the indenter by the control lever.
- The hardness value is shown directly on the dial, Twin Rockwell - Brinell

MODEL 206 EX SERIES

A twin Hardness Tester.
- Performs Rockwell and Brinell Tests in a single machine.
- Executes Rockwell and Brinell tests with real test force and specific ball indenter - Specific ball indenter.
- The depth detector and electronic calculator automatically measures and the Brinell value is shown on the clear LCD display.
ADVANCED AFFRI TECHNOLOGY INSIDE OFFER MODERN SOLUTIONS
- The force is created by a dynamometer without requiring oil, shock absorbers and without dead weights as in the obsolete systems of many competitors.
- The AFFRI Dynamometer System permits the operator to use the machine with highly accurate results and repeatability even if the machine is not level, inclined or is subject to vibrations . The hardness tester can operate directly next to the production line giving real time quality control.
- User friendly software permits the storage of results and calculation of average values.
The machine can connect to a printer or a PC to transmit stored data.
- A -set-of anvils permits easy tests on round or flat surfaces.
- Customised accessories can be provided to meet special requirements.
SIMPLE OPERATION:
Select load and scale for the correct indenter. Turn the hand wheel to raise the test piece into contact with the indenter and the result will appear automatically.